Inconel Products

A nickel-chromium alloy with good oxidation resistance at higher temperatures. With good resistance in carburizing and chloride containing environments. Our inconel is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. inconel products are available in inconel form of pipes,tubes,sheets,plates,coils,forged fittings,buttweld fittings,flanges,fasteners,bars and rods etc. 
Grades as under:- 
Inconel 600 (UNS No. N06600)

Inconel 600® heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.

Inconel 601 (UNS No. N06601)

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.

Inconel 617 (UNS No. NO6617)

Inconel 617® consists of nickel-chromium-cobalt and – molybdenum. These elements make Inconel 617® highly resistant to oxidation and carburization. Inconel 617® can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weldability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans.

Inconel 625 (UNS No. N06625)

Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix.

Inconel 718 (UNS No. NO7718)

INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium Material used at -423° to 1300°F.. The age-hard enable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to post weld cracking, are Outstanding. The ease and economy with which INCONEL alloy 718 can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tank age. It is also used for fasteners and instrumentation parts.

Inconel 800 (UNS No. N08800)

The INCOLOY® 800 series of alloys, invented by the Special Metals Corporation Group of Companies, is the result of years of monitoring and maintaining the ultimate chemical properties for high-temperature strength and resistance to oxidation, carburization and other types of high-temperature corrosion. Each one a refinement of the one before, these alloys have set the industry standard in high temperature applications requiring optimum creep and Rupture properties. INCOLOY nickel-iron-chromium alloy 800 was introduced to the market in the 1950s to fill the need for a heat- and corrosion-resistant alloy with relatively low nickel content since nickel was, at the time, designated a “strategic” metal. Over the past

Inconel 825 (UNS No. N08825)

INCOLOY® alloy 825 (UNS N08825/W.Nr. 2.4858) is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium. The alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. The nickel content is sufficient for Resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing Environments such as those containing sulfuric and phosphoric acids. The molybdenum also aids resistance to pitting and crevice corrosion. The alloy’s chromium content confers resistance to a variety of oxidizing substances such as nitric acid, nitrates and oxidizing salt. The titanium addition serves, with an appropriate heat treatment, to stabilize the alloy against Sensitization to inter granular corrosion. The resistances of INCOLOY alloy 825 to general and localized corrosion under diverse conditions gives the alloy broad usefulness. Applications include chemical processing, pollution control, oil and gas recovery, acid production, pickling operations, nuclear fuel reprocessing, and handling of radioactive wastes. Applications for alloy 825 are similar to those for INCOLOY alloy 020.